Pair of JCB QFit Q-Fit Teleporter Telehandler Brackets from 25mm Steel

Pair of JCB QFit Q-Fit Teleporter Telehandler Brackets from 25mm Steel. These are a pattern bracket so please note that extra fabrication and materials may be required to achieve the correct crowd and tip angles, clearances and heights. Suitable backing plates/strips may be required on your implement to ensure the correct fit, clearance or angles required.

When fitting these to your attachment please check and ensure the correct fit before fully welding them on. Please check you are ordering the correct brackets as some machines have non standard or altered head stocks fitted. This service covers most UK postcodes. However, some outlying areas, such as Islands, Highlands, and N. AB41, AB51-52, IV1-20, IV25, IV30-37, IV63, PH15-26, PA21-35, PA37-39, FK17-21, PH32, PH49-50, PO30-41.

AB30, AB33-38, AB42-45, AB53-56, DD8- 9, IV21-24, IV26-28, IV40, IV52-54, PA36, PA40, PH30-31, PH33-41, KW1-14, PA80. HS1-9, IV41-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, 60-78, PH42-44, ZE1-3. Channel Islands, Isle of Man, Northern Ireland. Please do not be alarmed if one arrives before the other, they do sometimes get separated in transit. Anything further you need to know, please ask.

BUYERS MUST SATISFY THEMSELVES AS TO THE CONDITION OF THE ITEM AND DECIDE WHETHER IT MEETS THERE EXPECTATIONS. THEREFORE, VIEWING OF THIS ITEM IS RECOMMENDED AND ENCOURAGED. VAT invoices are available; please let me know if you require one.

---